Need a robust, field-proven power supply tailored to extreme operating conditions? Submit your project requirements directly to our senior design team in Ottawa, Canada.
Rather than searching through standard off-the-shelf catalogues that fail to meet complex industrial stress factors, let ABSOPULSE evaluate your technical application. With over 40 years of OEM design expertise, we rapidly adapt field-tested topologies to meet your exact mechanical, electrical, and thermal specifications.
Specify nominal input voltage and operating ranges, required output voltages, current limits, regulation tolerances, transient protection, and hold-up time requirements.
Define operational ambient temperatures (-40°C to +70°C+), thermal cooling preference (convection, conduction baseplate, fan filters), and shock/vibration levels.
Specify mounting constraints (chassis mount, DIN-rail, 19" rack-mount Eurocard), IP66 sealed die-cast enclosures, conformal coating, or full encapsulation.
Review our typical platform design capabilities before submitting your custom request.
| Product Category | Power Envelope | Input Voltage Ranges | Output Configuration | Typical Cooling & Package |
|---|---|---|---|---|
| DC-DC Converters | 5W to over 10kW | 12V, 24V, 48V, 72V, 110V/125V, 250Vdc or Wide-Range | Single / Multiple output: 5V to 125Vdc+ | Convection, Cold-plate, Fan-assisted, IP66 Sealed |
| AC-DC Power Supplies | 15W to over 10kW | Universal 95-264Vac, 120/230/400Vac (Active PFC) | 12V, 24V, 48V, 125Vdc or regulated custom outputs | Open-frame, Chassis-mount, DIN-rail, Plug-in Module |
| Industrial Chargers | 50W to over 10kW | Universal AC or DC supply feeds | Multistage float/boost charging for Lead-Acid, NiCd, Li-Ion | Conduction / Convection cooled, IP66 Enclosures |
| Pure Sine Wave Inverters | 15VA to 10kVA+ | 24V, 48V, 110V/125V, 250Vdc or custom DC rails | 115Vac / 230Vac single-phase or 3-Phase (50/60/400Hz) | Convection cooled, Heavy-Duty Chassis, 19" Rack |
We deliver specialized, mission-critical power systems directly to global equipment manufacturers, power utilities, and infrastructure operators worldwide.
To provide an accurate technical proposal and cost quotation, please detail your required input voltage range, output voltage and load current requirements, operating ambient temperature range, preferred cooling method (fan-free convection, baseplate conduction, forced air), mechanical footprint, and applicable industry compliance standards (e.g., EN50155 railway, IEC 60950/62368 industrial, MIL-STD shock & vibration).
Yes. Unlike standard mass-market power supply catalog vendors, our flexible in-house manufacturing structure in Ottawa, Canada is specifically optimized to support low-to-medium production volumes for high-reliability, custom-engineered equipment.
We design long-life power solutions by eliminating optocouplers from feedback loops, utilizing conservative component derating, applying heavy-duty magnetics, and employing robust fan-free thermal management solutions that protect against heat-induced degradation.
Yes. We offer fully encapsulated modules and IP66-rated die-cast aluminum enclosures that protect sensitive power components from high-pressure water jets, conductive dust, salt spray, sand, and severe vibration environments.
Connect with our engineering specialists today to review your technical requirements and initiate a tailored quotation.