Engineering Support +1-613-836-3511
Switzerland’s electrical ecosystem demands strict compliance with ESTI (Federal Inspectorate for Heavy Current Installations) regulations, NEV electrical safety standards, and European CE directives (EN 62368-1, EN 61000-6-2/4). Standard commercial off-the-shelf power units frequently fail when deployed in high-altitude Alpine substations or sensitive industrial automation environments due to inadequate thermal headroom, poor harmonic filtering, and component stress under wide input fluctuation ranges.
Our regulated power conversion solutions integrate active power factor correction (PFC), zero-voltage switching (ZVS) topologies, and high galvanic isolation (up to 4300Vdc) to ensure continuous, zero-downtime operation across Swiss industrial networks.
Engineering for long service lifecycles requires eliminating systemic failure points. ABSOPULSE power supplies intentionally avoid optocouplers in primary feedback loops—which degrade over time—replacing them with magnetic feedback systems. Furthermore, all active semiconductors are conservatively derated by at least 30-50% in voltage and current capacity.
Whether exposed to freezing sub-zero conditions on high-altitude railway switchgear or enclosed in dust-sealed IP66 industrial cabinets, our units maintain tight output regulation (typically ±0.5% line/load) and low output ripple.
Select high-performance power conversion platforms available for direct export and integration into Swiss commercial, residential, and industrial applications.
Our heavy-duty power supplies and sine wave inverters are custom-configured to satisfy the precise environmental and operational demands of Swiss infrastructure.
Switzerland’s mountain passes and extensive rail networks demand power equipment capable of operating in unheated cabinets at high altitudes. ABSOPULSE supplies EN 50155-compliant railway-grade DC-DC converters and sine wave inverters engineered to absorb shock, vibration, and supply surges (up to 3.5 times nominal DC voltage) encountered on 72V, 96V, and 110V railway traction lines.
In hydroelectric plants across Valais, Grisons, and Ticino, utility-grade rectifiers and AC-DC battery chargers supply vital power to emergency trip coils, telemetry units, and supervisory control systems (SCADA). Our converters accommodate 16.7 Hz railway frequency systems as well as standard 50 Hz utility grids, delivering ripple-free DC current to critical station battery banks.
Analytical equipment and bio-processing lines require galvanic isolation and minimal electromagnetic emissions to prevent signal corruption. Our power supplies meet IEC/EN 60601-1 and EN 55032 Class B EMC standards, featuring fully encapsulated IP66 die-cast aluminum enclosures that withstand harsh chemical washdowns in sterile pharmaceutical manufacturing facilities.
Under Switzerland’s Energy Strategy 2050, the nation is shifting aggressively toward renewable microgrids, rooftop solar expansion, and distributed energy storage. This shift creates acute demand for bidirectional hybrid inverters, split-phase battery energy storage systems (ESS), and active PFC power rectifiers capable of handling dynamic load shifts and bidirectional power flows without introducing grid distortion.
Swiss system integrators prioritize units with native MODBUS/CAN-bus telemetry, allowing automated coordination with smart-grid management platforms across cantonal utilities.
Much of Switzerland’s critical infrastructure operates at elevations exceeding 1,500 meters above sea level, where atmospheric density decreases significantly. Standard forced-air cooling systems suffer reduced heat-dissipation performance at these altitudes, risking premature thermal shutdown.
ABSOPULSE mitigates high-altitude thermal degradation by using conduction-cooled baseplates, custom heat-sink geometries, and pure natural convection designs. This fan-free architecture eliminates mechanical moving parts, preventing dust accumulation and extending operational reliability indefinitely.
Every converter, inverter, and power supply is designed, prototyped, potted, and burn-in tested inside our purpose-built 80,000 sq ft facility in Ottawa, Canada. We control 100% of magnetics winding, PCB assembly, and final environmental qualification testing under ISO 9001 strictures.
Rather than forcing your engineers to compromise on stock specifications, our design engineering team modifies proven base topologies to match non-standard input voltages (e.g., 16.7Hz AC, 125Vdc, 250Vdc), custom form factors, specialized connectors, or target vibration profiles.
We deal directly with Swiss original equipment manufacturers (OEMs), engineering consultants, rail builders, and energy distributors. Technical consultations are conducted directly by qualified power electronics engineers, ensuring accurate specs and seamless customs compliance.
Our design topologies comply directly with European Safety Standard EN 62368-1 (superseding EN 60950-1) and applicable EMC standards (EN 55032/EN 61000 series). All exported units bear the CE mark, allowing seamless installation under Swiss NEV (Niederspannungserzeugnisse-Verordnung) regulations enforced by ESTI.
Yes. We manufacture customized AC-DC power supplies and AC-AC frequency converters specifically designed to accept 16.7 Hz single-phase AC inputs derived from train catenary lines or stationary rail supply grids, converting them to clean, regulated DC or 50 Hz/60 Hz pure sine wave AC output.
We manufacture fully encapsulated units using thermally conductive immunity potting, as well as IP66-rated cast aluminum enclosures. These systems provide complete protection against powerful water jets, fine conductive dust, salt fog, high humidity, and insect ingress typical of outdoor mountain installations.
Standard semi-custom prototypes are typically engineered and delivered within 6 to 8 weeks, while production runs follow agreed schedule releases. All shipments are packaged for international air/freight logistics, complete with customs documentation, HS codes, and certificates of origin for smooth Swiss customs clearance.
Yes. We supply 19-inch and 23-inch rack-mount power systems populated with plug-in Eurocard modules. These support N+1 redundancy, hot-swappable replacement, active load sharing, and remote status monitoring via dry relay contacts or digital communication interfaces.
Whether you require a custom DC-DC converter for rolling stock, an IP66-sealed power supply, or a high-capacity energy storage inverter, our senior design team is ready to evaluate your specifications.