Engineering Support +1-613-836-3511
Direct factory supply of certified switch-mode power converters, split-phase hybrid inverters, and commercial energy storage modules qualified for North African operational environments.
As a premiere OEM power conversion factory and global exporter delivering specialized hardware across North Africa, our engineering foundation rests on solving high-stress electrical, thermal, and environmental challenges. Operating out of an advanced 80,000 sq ft manufacturing facility in Ottawa, Canada, our design philosophy shuns cheap commercial off-the-shelf compromises in favor of ruggedized, field-proven switch-mode topologies designed to perform continuously for up to 30 years in extreme conditions.
Morocco’s rapid industrial expansion—spanning intensive phosphate mining, vast solar megaprojects, electrified rail infrastructure, and coastal maritime ports—demands electrical infrastructure capable of handling wide voltage swings, heavy dust loads, atmospheric salinity, and severe thermal dissipation requirements. Unlike mass-market catalog power supplies that fail prematurely due to thermal stress or capacitor degradation, our engineering framework integrates heavy component derating, elimination of optocouplers from feedback loops, and advanced thermal management (including heatsink convection, conduction baseplates, and IP66 fully encapsulated die-cast aluminum enclosures).
Engineered with high-margin component derating and optocoupler-free feedback paths. Built specifically to survive extreme ambient grid fluctuations, high harmonics, and continuous high-load operational cycles.
Fully encapsulated and potted modules housed in anti-corrosive die-cast aluminum chassis. Impervious to sandstorms, fine metallic phosphate dust, high coastal humidity, and direct washdown environments.
We specialize in custom engineering. We adapt proven platform topologies to exact Moroccan client specifications for input voltage rails, surge capabilities, mechanical envelopes, and bus communications.
Morocco is rapidly positioning itself as North Africa’s premier green energy and industrial manufacturing hub. Our specialized power conversion systems, rectifiers, hybrid inverters, and battery chargers are custom-tailored to provide seamless operational reliability across the Kingdom’s primary industrial landscapes:
Morocco holds over 70% of the world’s phosphate reserves. The heavy processing equipment, slurry pipelines, automated conveyor systems, and extraction rigs operated by OCP Group require power conversion units that can withstand abrasive dust, continuous physical vibration, and hostile outdoor conditions.
Our Solution: IP66-rated sealed DC-DC converters and high-power AC-DC industrial rectifiers. Encapsulated magnetics ensure zero metallic dust penetration, guaranteeing uninterrupted DC control bus power for automated extraction equipment and monitoring sensors.
Morocco’s national solar initiatives feature immense solar irradiation but experience harsh thermal swings—from sub-zero desert winter nights to over +45°C ambient summer temperatures. Off-grid remote telecommunication towers, monitoring stations, and energy storage hubs require robust solar inverters and DC-AC sine wave conversion.
Our Solution: Wide-temperature, pure sine wave DC-AC inverters (ranging from 10kW to 250kW hybrid systems) equipped with MPPT solar controllers, operating flawlessly across wide input voltage windows without thermal tripping.
The expansion of Morocco’s high-speed rail lines (ONCF Al Boraq) connecting Tangier, Rabat, Casablanca, and Marrakech, alongside the massive maritime operations at Tanger Med Port, demands strict compliance with transit standards, high isolation, and transient suppression capabilities.
Our Solution: Railway-qualified DC-DC converters and shipboard-grade AC-AC phase/frequency converters. Designed with shock and vibration immunity, high galvanic isolation, and low electromagnetic interference (EMI) for critical signal control, onboard power, and crane control systems.
Manufacturing facilities inside the Tangier Free Zone and commercial hubs in Casablanca face peak electricity tariffs and grid instability. Facilities require hybrid inverter systems capable of peak shaving, seamless transition to battery power during outages, and clean power factor correction.
Our Solution: Megerevo-series 150kW-250kW hybrid solar energy storage systems and 10kW-15kW split-phase hybrid inverters for modern industrial estates and luxury residential complexes seeking energy self-sufficiency.
Moroccan Import & Compliance Advantage: Our export engineering department handles all paperwork required for smooth entry into Morocco, complying with ONEE (Office National de l'Électricité et de l'Eau Potable) grid parameters, CE standards, and Moroccan Customs clearance procedures with DDP delivery options directly to Casablanca and Tangier Med logistics hubs.
Morocco is undergoing a historic energy transformation. Driven by the National Energy Strategy, the Kingdom aims to generate over 52% of its total electricity capacity from renewable sources by 2030. This ambitious pivot, combined with massive investments in Green Hydrogen production and industrial decarbonization for European export compliance (CBAM), creates unique technological requirements for power supply infrastructure.
The table below summarizes our primary manufacturing platform parameters for engineering teams, OEM buyers, and system integrators sourcing power equipment for deployment in Morocco.
| Platform Category | Power Range | Input Voltage Options | Output Voltage / Waveform | Ingress & Cooling Options | Primary Moroccan Industry Target |
|---|---|---|---|---|---|
| Industrial DC-DC Converters | 5W to 10kW+ | 12V, 24V, 48V, 72V, 110V, 250Vdc | Regulated 5V, 12V, 24V, 48V, 125Vdc | Convection, Heatsink, IP66 Encapsulated | OCP Mining, ONCF Rail, Telecom Towers |
| DC-AC Pure Sine Wave Inverters | 300W to 15kW | 12V, 24V, 48V, 110Vdc Bus | 110V/220V/230Vac Pure Sine (50/60Hz) | Quiet Hybrid Cooling, Chassis / Rack | Off-Grid Solar, Commercial Microgrids |
| Commercial Solar Hybrid ESS | 10kW to 250kW | High Voltage PV / 48V-51.2V Battery | 120V/240V Split Phase, 380V/400V 3-Phase | NEMA 4X / IP54 - IP65 Enclosure | Industrial Factories, Tanger Free Zone |
| AC-DC Power Supplies & Chargers | 15W to 10kW+ | 95–264Vac Universal (Active PFC) | Float/Boost Lead-Acid & LiFePO4 Bus | Conformal Coated, Eurocard Rack-Mount | Substations, Desalination Plants |
Answers to common inquiries regarding logistics, grid code compatibility, environmental protection, and custom OEM manufacturing for Morocco.
Our heavy-duty power supplies and DC-DC converters utilize fan-free convection cooling assemblies with extruded aluminum heatsinks or IP66 fully encapsulated die-cast enclosures. This eliminates internal air dust flow, protecting internal electronics from fine sand, airborne phosphate dust, and ambient thermal derating up to +75°C.
Yes. Our AC-DC power supplies, hybrid inverters, and UPS systems are engineered to meet European and North African grid parameters (220V/230V single-phase, 380V/400V three-phase at 50Hz nominal). Units feature Active Power Factor Correction (PFC) to absorb harmonics and withstand local power sags or surges.
We provide multiple shipping pathways, including Direct Air Freight for urgent prototype samples to Casablanca (CMN), Maritime Container shipping to Tanger Med Port, and DDP (Delivered Duty Paid) fulfillment through our EU warehouses for stocked commercial storage and inverter systems.
Absolutely. As an original equipment manufacturer (OEM) with over four decades of engineering heritage, custom power conversion is our core specialty. We can modify existing field-proven topologies to match unusual input voltages, custom mechanical footprints, specialized connector interfaces, or extreme weather ratings.
While commercial catalog power supplies are rated for 3 to 5 years, our industrial power conversion units are conservatively designed with a target service life of up to 30 years. We achieve this by using high-temperature rated components, eliminating short-lived optocouplers, and maintaining strict thermal margins.
All shipments come complete with comprehensive Factory Acceptance Test (FAT) reports, compliance documentation (CE, IEC, ISO9001 quality standards), detailed technical schematics, installation manuals, and warranty certification.
Connect directly with our senior power electronics engineering team. Whether you require IP66 dust-proof rectifiers for mining operations, high-efficiency hybrid solar inverters, or custom DC-DC converters for railway expansion, we provide fast engineering reviews and factory-direct quotation.